Par matdungalu le 14 Juillet 2016 à 19:26
The facades of countless high-rises are constructed of aluminum, the sweetness material the actual leading collection of many architects and designers today. Here's a have a look at how these facades may be maintained and kept as clean as new.
mặt dựng aluminium
For several years now, aluminum facades have adorned the high-rise structures throughout the world and are usually often considered as a maintenance-free material, no wonder many architects and designers are opting for this fabric. Speculate these highrises look good, it can be incredibly important so they can actually 'look good' and thus they should be cleaned and maintained to retain their sheen in addition to their original appearance.
With growing environmental concerns affecting most of us, the buildings and highrise structures will also be not spared. With pollutants, dirt and emissions taking their toll on these facades, cleaning and maintaining them becomes an absolute necessity. Zeroing in around the aluminum facades, here's a brief input about how these aluminum facades could be maintained as well as what can be done to retain their original glory.
mặt dựng nhà đẹp
Cleaning aluminum facades requires much technical and professional care, gauging the extent of cleaning that should be prepared for individual structures. Buildings made of anodized aluminum, painted aluminum facades degrade as a result of various pollutants so because of this the cleaning procedure involves removal of oxidation, chalking, pollutants and silicone residues in the surface. Although anodized aluminum was considered maintenance-free earlier since it was viewed as hard and weather-proof. But all this changed as environmental hazards started taking toll on the structures and corrosion rates started rising. So, taking all this into account, here is how aluminum facades can be cleaned through the following methods:
The essential cleaning of the anodized aluminum fa�ade includes water cleaning methods and chemical cleaning methods. Water cleaning methods include water soaking and pressure washing, though pressure washing is just not suitable for aluminum facades.
A regular flow water is used to loosen the dirt utilizing the desired nozzles and piping. In the event the dirt, soil or grime still remains, then hand scrubbing with brushes and sponge with continuous spraying water can be executed. If grime still stays around the facades, brushing and sponging with mild detergent is possible.
Care needs to be taken while following this method that the water pressure is uniform which the cleaning needs to be first done horizontally and then vertically. In the event the removal of wax, oil or polish is essential from your surface then MEK (Methyl Ethyl Ketone) or perhaps equivalent solvent is suggested though how's that for performed very meticulously because the use of any chemicals might make damage of organic sealants, gaskets and finishes. It is usually advisable to not use these solvents for anodic finishes which are protected by clear organic coatings unless the coatings must be removed.
Abrasive cleaning is needed once the facades have heavy surface soils on the outside. This could be cleansed using an abrasive cleaning pad for which the information presented is thoroughly soaked with clean water or even a mild detergent cleaner and the surface is hand scrubbed applying uniform pressure. Scrubbing can even be done with a nylon-cleaning pad soaked which has a surface protectant material and is usually employed for removing stubborn soils and stains.
In abrasive cleaning, the scrubbing carried out toward the metal grain and the surface needs to be rinsed thoroughly with clean water so the entire residue is taken away. The surface should then be air-dried or wiped having a chamois, squeegee or lint-free cloth.
While aluminium facades are one of the easiest ones to keep and clean, still some precaution must be exercised before going up with the procedures. Having identified the outer lining area that requires attention, appropriate cleaning methods also needs to be identified based on the area. It really is advised to never use quite strong alkaline or acid cleaners.
Also cleaning hot, sun-heated surfaces ought to be avoided since they could lead to chemical reactions that could be highly accelerated plus uniform cleaning is probably not achieved. Anodized aluminium probably won't get suffering from the application of strong organic solvents but may result in the extraction of stain-producing chemicals from sealants and may even affect its function. Also, using strong cleaners is just not advisable on microsoft windows simply because this might are in contact with aluminium and excessive abrasive rubbing should be avoided so as to prevent the finish.
Using these tips, good care of aluminium facades is possible with slight meticulous planning; thus ensuring that original sheen and newness on this wonder metal is retained and maintained.
Nidaplast Launches Its Innovations inside the Asian Market
Within a context of increasingly scarce and dear garbage, Nidaplast has come up with several new solutions through applications that combine nidaplast�8* honeycomb with traditional materials including wood or marble, or with heavier materials for example fibre-reinforced concrete, steel, etc. The structural sandwich panels developed by nidaplast composites have the good thing about being both cost-effective and eco-friendly. Since they use less material (a sandwich panel having a 7 mm-thick marble layer can replace a standard 20 mm-thick sheet of marble), they're lighter, thereby conserving fuel consumption and reducing exhaust emissions. They're also stiffer and supply new advantages including thermal and acoustic insulation, not to mention greater impact and fatigue-resistance without needing to increase the material.
Suivre le flux RSS des articles de cette rubrique
Suivre le flux RSS des commentaires de cette rubrique